DaheimLader Touch PRO
Your Intelligent All-in-One EV Charger
The DaheimLader Touch PRO with 11kW or 22kW is the smart charging solution for your home. With the intuitive 7-inch touch display, robust metal housing, MID-compliant electricity meter, intelligent software and first-class support, it is ideal for intelligent and safe charging at home.
private use
app control, PV charging & load management
company car accounting
rental or employee parking spaces
commercial use
High-quality workmanship & operation with touch display
Robust and weatherproof metal housing & tempered glass front with 7-inch touch display.
Equipment
01 .
Billing-compliant MID electricity measurement
The MID-compliant electricity meter enables precise billing, e.g. for your company car, business or rental.
02.
Access protection via RFID card reader
Use the automatic charging start (Plug & Charge) or activate the RFID card access protection. Manage all users in the app. Four RFID cards are already included in the delivery.
03.
Interfaces for home network integration
Integrate your EV charger into your home network via the LAN or WLAN interface or Modbus TCP (LAN). Also available with an optional 4G/LTE modem.
04 .
Extensive safety equipment
Extensive safety and fault protection sensors are already integrated in the EV charger (AC 30mA / DC 6mA).
The DaheimLader Touch PRO in 100 seconds
We’ve put the DaheimLader Touch PRO EV charger in front of the camera and summarized all the features and functions of the DaheimLader Touch PRO in just 100 seconds. Watch the DaheimLader in action!
Buy DaheimLader Touch PRO
Details about the DaheimLader Touch PRO
Especificaciones DaheimLader Touch PRO | 11kW | 22kW |
|---|---|
input nominal voltage | 400V ± 10%
3-phase connection |
Maximum charging current | 11kW / 16A | 22kW / 32A |
charging mode | according to IEC 61851-1, Mode 3 |
nominal frequency | 50 Hz / 60 Hz |
connection/pre-fuse | 3-phase connection, fuse: LSS C16 / LSS C32 (optional: 1 or 2-phase connection) |
connection technology | Case C: Permanently connected charging cable 5m / 7.5m or
Case B: Charging base for connectable mobile cable (optional accessory) |
interfaces | WLAN (2.4 GHz / 5GHz) / LAN (RJ45-min. CAT6) / OCPP 1.6-J / Modbus TCP (LAN) / Optional with 4G / LTE modem
|
OCPP | version 1.6-J |
Control & Access Protection | automatic charging start without card, start-stop switch, RFID charging card (included) |
scope of delivery | Wallbox, manual (German), 4 x RFID cards, mounting set |
reference standards | IEC 61851-1:2017,
IEC 62196-2:2016,
IEC 60364-7-722:2018,
IEC 61851-1 (3.1.9; 6.2.3) |
PV surplus charging | Yes / Integration via current sensor (optional accessory), works independently of the inverter |
Dimensions | 427 x 268 x 150 mm |
assembly | DaheimLaden DockingStation for easy wall mounting or stand for free-standing installation (optional accessory)
|
software functions | App for iOS or Android & web portal, functions including charging reports, remote start+stop, RFID-specific consumption recording, cloud-based load management |
compatible according to §14a EnWG | Yes, via potential-free contact, Modbus TCP, DaheimLaden LastManager (EEBus) |
Protecciones | DaheimLader Touch PRO |
|---|---|
Ambient temperature operation | -30 to 55 degrees Celsius |
Residual current sensors | RCD integrated (AC 30mA/DC 6mA) |
Surge protection | ✅ |
Temperature monitoring | ✅ |
Relative humidity | Up to 95%, non-condensing |
Enclosure Protection Rating | IP 65 |
